ENG  RUS  GEO 

WiNRADiO WR-ACD-1800 Dual Antenna Combiner

Оценить
The WiNRADiO WR-ACD-1800 Dual Antenna Combiner solves the age-old problem of connecting two separate HF and VHF/UHF antennas to a wide-band communications receiver. In addition to this basic functionality, this product can also serve as a DC power injector for active antennas, both for HF and VHF/UHF antenna sections.

Simplicity of installation, low insertion loss, high input isolation and wide-band operation, all make this product eminently suitable for general-purpose wide-band communications and scanning receivers from 9 kHz to 2.5 GHz, with antenna cut-off frequency 30 MHz.

The WiNRADiO WR-ACD-1800 Dual Antenna Combiner is especially suitable for use with WiNRADiO G3 series of general coverage scanning receivers, such as the WR-G305iWR-G305e,WR-G315i and WR-G315e receivers. It can be also used with any third-party reeceivers.

A typical example of a suitable antenna system would be an HF long-wire or active antenna used in conjunction with a VHF/UHF discone, for example WiNRADiO AX-81S HF Active Antenna plus a WiNRADiO AX-71C Discone.

Features 

 Wide frequency range 
 Flat pass band 
 Low insertion loss 
 High input isolation
 No DC power required for combiner operation 
 Provision for DC power for active antennas ('Bias-T' function) 
 Rugged weatherproof construction 
 Simple installation
WR-ACD-1800 Dual Antenna Combiner Installation The WiNRADiO WR-ACD-1800 Dual Antenna Combiner is connected between the antennas and receiver using SMA connectors and suitable low-loss coaxial cables.

No power supply is required for the combiner operation. To provide DC power to active antennas (for example the WiNRADiO AX-81S Active HF Antenna), we recommend using WiNRADiO SF-41 range of low-noise linear power supplies.

 

Technical Specifications
HF Input
Insertion loss 0.4 dB @ 20 MHz
Cut off frequency 30 MHz @ 3 dB
Pass band 9 kHz - 30 MHz
Type 5-section Low Pass
Input impedance 50 Ohms
Attenuation >35 dB @ 45 MHz
VHF/UHF input
Insertion loss 0.5 dB @ 60 MHz
Cut off frequency 45 MHz @ 3 dB
Pass band 45 MHz - 1.8 GHz
Type 5-section High Pass
Input impedance 50 Ohms
Attenuation >30 dB @ 30 MHz
Typical isolation between inputs 48 dB
Connectors SMA (in/out), DC jack for power supply
Output
Frequency range 9 kHz - 1.8 GHz
Output impedance 50 Ohms
DC input
Max. input voltage 50 V DC
Max. current 250 mA


Specifications are subject to change without notice due to continuous product development and improvement.

 

Есть вопросы?

Вы можете задать нам вопрос(ы) с помощью следующей формы.



Пожалуйста, сформулируйте Ваши вопросы относительно WiNRADiO WR-ACD-1800 Dual Antenna Combiner:


Введите число, изображенное на рисунке

code